(10) MS21919WDG2 1/8" UMPCO Single Loop Cushioned Clamp

Description

Genuine Aircraft Hardware Co. MS 21919 Clamp, Loop Type, Cushioned, Support        1. MATERIALS: BAND - - - ALUMINUM ALLOY CORROSION RESISTANT STEEL LOW CARBON STEEL CUSHION - - - ETHYLENE PROPYLENE NITRILE CHLOROPRENE SILICONE FLUOROSILICONE
2. FINISH: CHEMICAL CONVERSION PASSIVATED CADMIUM PLATED
3. MATERIAL CODES: LETTER ( S ) INDICATES BAND AND CUSHION MATERIALS. DO NOT SPECIFY BAND / CUSHION COMBINATIONS NOT LISTED. MAXIMUM RECOMMENDED TEMPERATURE IS INDICATED IN PARENTHESIS. DE = ALUMINUM BAND WITH ETHYLENE PROPYLENE CUSHION ( 212º F ) DF = ALUMINUM BAND WITH NITRILE CUSHION ( 212º F ) DG = ALUMINUM BAND WITH CHLOROPRENE CUSHION ( 212º F ) CE = CRES BAND WITH ETHYLENE PROPYLENE CUSHION ( 275º F ) CF = CRES BAND WITH NITRILE CUSHION ( 212º F ) CH = CRES BAND WITH SILICONE CUSHION ( 400º F ) CG = CRES BAND WITH CHLOROPRENE CUSHION ( 212º F ) CJ = CRES BAND WITH FLUOROSILICONE CUSHION ( 450º F ) F = LOW CARBON STEEL BAND WITH NITRILE CUSHION ( 212º F ) G = LOW CARBON STEEL BAND WITH CHLOROPRENE CUSHION ( 212º F ) H = LOW CARBON STEEL BAND WITH SILICONE CUSHION ( 400º F )                                                                                                          4. CUSHION APPLICATION AND COLOR INFORMATION ETHYLENE PROPYLENE - FOR USE IN AREAS CONTAMINATED WITH PHOSPHATE ESTER HYDRAULIC FLUID AND OTHER SYNTHETIC FLUIDS. EXCELLENT OZONE RESISTANCE. NOT RESISTANT TO PETROLEUM BASED FLUIDS. COLOR SHALL BE SOLID PURPLE. NITRILE - FOR USE PRIMARILY IN FUEL IMMERSION AND FUEL VAPORS. GOOD OZONE RESISTANCE. NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS. NOT FOR USE ON TITANIUM TUBING. COLOR SHALL BE SOLID YELLOW. CHLOROPRENE - FOR GENERAL PURPOSE USE IN AREAS CONTAMINATED WITH PETROLEUM BASED HYDRAULIC FLUIDS AND OCCASIONAL FUEL SPLASH. EXCELLENT OZONE RESISTANT. NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS. NOT FOR USE ON TITANIUM TUBING. COLOR SHALL BE BLACK WITH A BLUE IDENTIFIER PER THE PROCUREMENT SPECIFICATION. SILICONE - FOR ELEVATED TEMPERATURE USAGE IN PHOSPHATE ESTER BASED FLUID AND OTHER SYNTHETIC FLUID CONTAMINATED AREAS. UNAFFECTED BY OZONE. NOT RESISTANT TO PETROLEUM BASED FLUIDS. COLOR SHALL BE NATURAL WHITE. FLUOROSILICONE - FOR ELEVATED TEMPERATURE USAGE IN PETROLEUM BASED FLUID CONTAMINATED AREAS. UNAFFECTED BY OZONE. NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS. COLOR SHALL BE SOLID BLUE. NOTES: • PROCUREMENT SPECIFICATION: MIL-C-8603 • SUPERSEDES: NONE • THIS INFORMATION FROM MILITARY STANDARD MS21919 PAGE 3 OF 4, REVISED SEPTEMBER 30, 1981, SOME