ALPHASENSE 3D DLP/SLA/LCD WAX CASTABLE RESIN FOR DENTAL & JEWELRY (500ML)

Description

CAUTION: Recently many unauthorized sellers are listing counterfeited AlphaSense resin products on Ebay and other platforms. AlphaSense is the sole manufacturer and vendor of our resin products, and there is no authorized reseller within USA. Buyers need to be cautious about those fraudulent activities!
What you are purchasing is AlphaSense's castable wax resin, which has been well received by hundreds of jewelry makers and dental lab technicians worldwide. With this resin product, you will enjoy the following benefits:
Fast curing and compatibility with a wide array of printers
. No matter what type of printer you are using (i.e. DLP, SLA and LCD), a model can be fabricated with a very high speed of ~1-2 inches/hour. For users with a DLP printer, each layer of ~100 micrometer thickness can be cured within 5 to 15 seconds depending on the light flux and model cross section. Users with LCD printers may need to use longer exposure time (e.g. 18 to 36 seconds/layer). The resin has a relatively low viscosity, thus allowing one to use a shorter (1-2 seconds) of resin immersion and settling time;
Smooth surface finish and high resolution
. Prints resulted from this resin product show very smooth surfaces. It is generally difficult to visually differentiate layer boundaries even if a relatively rough (i.e. 0.1 mm/ 100 micron) step size/resolution was used.
It should be noted that all the sample models were printed using a layer resolution of 100 micron for the capability demonstration. The resin allows resolutions in the range from 25 to 200 microns
;
Easy cleaning and post curing. The resin can be cleaned with just warm tap water if you do not have isopropyl alcohol!
Low odor and low volatile organic compounds (VOCs)
. Our unique material selection makes the resin have very low odor, which is drastically different from the resins supplied by some other vendors;
Ashless burnout
. The resin allows ashless burnout and the residue is less than 0.2% after complete polymer removal.
Good surface casting quality
. A burnout schedule will be provided to the user. If those instructions are strictly followed, the final casting products will show a very smooth surface, thus minimizing the need for post processing.
The casting processes are very similar to conventional "lost-wax casting method" except different polymer burnout schedule needs to be followed. Instructions on 3D printing, molding and polymer burnout schedule will be provided and shipped with the order. Negligible ash/resin residue will be left (i.e. <0.2%) after the polymer removal process, thus leaving a shape- and configuration-complementary cavity in the mold for subsequent casting to obtain high- quality dental parts and jewelry products, such as removable partial dentures, crowns, rings, necklace pendants, and bracelets etc.
Depending on the models, very little to no post- processing of the casting parts is needed!
Based on a recent survey of our existing customers, it appeared that our jewelry users prefer this castable wax resin over our standard castable product. Please select accordingly based on your intended applications.
Each batch of resins was fully tested before it was shipped to our customers to ensure the best printing quality at a highly competitive price!
Note 1: Different batchs of resin may show slightly different appearances as the true pigment color vary from batchs to batchs. Printing and casting using those resins, however, will not be affected by their colors.
Note 2: Overseas customers may have to pay the import tax to the custom of your  country.