NinjaTek 3DCH05117505 NinjaTek Cheetah TPU Filament, 1.75mm, TPE. 5kg, Lava (...

Description

NinjaTek 3DCH05117505 NinjaTek Cheetah TPU Filament, 1.75mm, TPE. 5kg, Lava (Orange) (Pack of 1)
Make sure this fits. by entering your model number.
Prints at speeds greater than 60 mm/s with standard ABS settings
Significantly greater impact strength than all widely used materials 84% greater than ABS!
Industry leading toughness and durability to ensure longevity in printed parts
Cheetah flexible filament is the fastest and easiest to print flexible filament on the market. The focus in development of this material was on optimizing the user experience. The result is a filament that is printable across all types of desktop 3D printers at ABS and PLA speeds, many times twice the speed of other flexible materials on the market. Cheetah filament possesses industry leading durability along with impact strength 84% greater than ABS. The abrasion resistance is also second only to NinjaTek’s Armadillo product, making Cheetah the perfect blend of speed, toughness and strength. Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts. KEY FEATURES: Shore Hardness = 95A Prints at speeds greater than 60 mm/s with standard ABS settings Significantly greater impact strength than all widely used materials – 84% greater than ABS! Industry leading toughness and durability to ensure longevity in printed parts Abrasion resistance 40% better than ABS and 76% better than PLA 580% elongation capabilities improve ability to withstand wear and tear Patented low friction exterior allows for smooth feeding Chemical resistant to many materials, including naphtha, ASTM Oils 1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 230°C – 240°C Platform Temperature: Room temperature – 40°C Glue and/or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 30-45 mm/ sec (1800-2700 mm/ min) Infill speeds: 60-80 mm/ sec (3600-4800 mm/ min) Layer 2+ use cooling fan if available.